BECHEM BERUFORM STO 533

Non water miscible punching and deep drawing oil

Examples of Application
·  Demanding sheet forming operations
·  Bending
·  Deep drawing
·  Punching

Material
·  Steel
·  Stainless steel
·  Aluminium

Properties
·  Balanced combination of AW and EP additive *
·  Chlorine free **, hence Increased occupational safety
·  High adhesion
·  Good corrosion protection
·  Not suitable for machining of non-ferrous metals

Characteristic data
·  Appearance : black brown fluid

 

Density at 20 °C

g/cm3 0.88 – 0.91

AA_003-9 acc. to DIN 51757

Kin. viscosity at 40 °C

mm2/s 24 – 30

AA_003-133 acc. to DIN 51562

Flash point

°C ≥ 180

AA_003-125 acc. to DIN ISO 2592

 

Instructions for use

·  Product is applied manually by drip oiler, rollers or suitable pneumatic lubricating equipment

·  The formed pieces can be easily cleaned with conventional solvents or in aqueous alkaline degreasing baths

* Anti Wear / Extreme Pressure additive

** Chlorine containing additives are not included in the formulation