BECHEM BERULIT 366

Lubricant for massive forming

Examples of Application
·  Massive forming

Material
·  Steel

Properties
·  Good release effect
·  Offers anti wear protection
·  Water soluble
·  Graphite free

Characteristic data
·  Service temperature : +120 °C to +280 °C
·  Appearance : transparent

 

Evaporation residue

% 11.8 – 13.5

AA_003-153

Density at 20 °C

g/cm3 1.02 – 1.06

AA_003-9 acc. to DIN 51757

Efflux time at 25 °C

s 30 – 90

AA_003-121 acc. to DIN ISO 2431/4

pH value

9.0 – 10.2

AA_003-33 acc. to DIN 51369

 

Instructions for use

·  Applied on the tools by suitable spraying systems, best by fine atomization

·  After spraying and drying a white effective layer remains on the tool which provides good lubricating and release effect during the forming process

·  Depending on the requirements and severity of the forming process, it should be mixed with water in a ratio from 1:5 up to 1:10

·  Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +40 °C