BECHEM BERULUB PMP 75

High performance lubricant with a special solid lubricant combination for metals and polymer materials

Examples of Application
·  HVAC regulation
·  Window regulators
·  Sun roofs
·  Seat adjustments
·  Steering wheel locks
·  Push pull cables
·  Grid and guide rails of electrical switches
·  Kinematic components
·  Mirror adjustments
·  Electronic parking brake systems
·  Small gears even at high loads
·  Plain and roller bearings

Material combinations
·  Metal / plastic
·  Plastic / plastic
·  Metal / non-ferrous metal

Properties
·  Dynamically very light multipurpose grease
·  Reduced friction and wear
·  Excellent low temperature behaviour
·  Long life lubrication
·  Very good noise damping
·  Oxidation stability
·  Good compatibility with plastics
·  Prevents stick slip
·  UV indicator

Characteristic data
·       Service temperature : -50 °C to +140 °C,
·       Appearance : beige
·       NLGI grade : 1 – 2 *

 

Thickener

Polytetrafluoroethylene  PTFE

Unworked penetration

1/10 mm 290 – 320 DIN ISO 2137

Four ball weld load

N ≥ 5,000 DIN 51350-4

Flow pressure at -40 °C

mbar ≤ 450 DIN 51805
Oil separation 18 h/40 °C % ≤5

DIN 51817

Base oil

Poly alpha olefin

Kin. viscosity at 40 °C mm2/s approx. 75

DIN 51562

Kin. viscosity at 100 °C mm2/s approx. 12

DIN 51562

 

Instructions for use

·  Prior to serial production compatibility tests are recommended

·  The integrated UV indicator allows detection of the lubricant during quality control by means of UV light

* The indication refers to the unworked penetration