BECHEM KUBITRAC 4019

Non water miscible drawing oil

Examples of Application
·  Drawing of tubes and wires
·  In calibrating drafts without internal tool, this product is used for the OD lubrication
·  Finishing oil for the ID lubrication in the final pass of drawing tubes

Materials
·  Copper
·  Brass

Properties
·  Chlorine, sulphur or phosphorus free *

Characteristic data
·  Appearance : clear colorless to pale yellow liquid

 

Density at 20 °C

g/cm3 0.84 – 0.86

AA_003-9 acc. to DIN 51757/5

Kin. viscosity at 40 °C

mm2/s 10 – 13

AA_003-133 acc. to DIN 51562/1

Flash point

°C ≥ 150

AA_003-125 acc. to DIN EN ISO 2592

 

Instructions for use
·  In the following annealing process the remaining film of the drawing oil evaporates practically residue free

·  Drawing oil remnants relevant in solvent can also be removed easily

·  Storage : Container to be stored under dry and frost-protected conditions. Temperature range +5 °C to +60 °C

* Chlorine, sulphur or phosphorus are not part of the product formulation