BECHEM MASTERDRAW 558 SC

Drawing oil

Examples of Application
·  Drawing of non-ferrous tubes, rods and profiles
·  Specifically for drawing of copper tubes on drum drawing machines and draw benches

Materials
·  Copper
·  Aluminium

Properties
·  Excellent viscosity index
·  Long tool life
·  Excellent surface qualities
·  Contains mineral oil
·  Chlorine and sulphur free *

Characteristic data
·  Appearance : light brown fluid

 

Density at 20 °C

g/cm3 0.86 – 0.89

AA_003-9 acc. to DIN 51757

Kin. viscosity at 40 °C

mm2/s 4,560 – 5,040

AA_003-132 acc. to ASTM D 446

Kin. viscosity at 100 °C

mm2/s

250 – 300

Flash point

°C ≥ 200

AA_003-125 acc. to DIN EN ISO 2592

 

Instructions for use

·  To be used pure

·  Can be applied volume controlled in TOTAL LOSS ® procedure

·  Applied manually, or in recirculation lubrication when suitable pump systems can be used

·  Can be easily cleaned by vapour degreasing or solvent washing methods

·  Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C

* Chlorine and sulphur are not part of the product formulation