BECHEM MASTERDRAW EBE 270

Drawing oil

Examples of Application
·  Drawing of profiles, slags and non-ferrous tubes
·  Specifically for drawing of copper tubes on drum drawing machines and drawing benches, low to high wall thickness

Materials
·  Brass
·  Copper / nickel alloys

Properties
·  Excellent viscosity index
·  Long tool life
·  Contains mineral oil
·  Chlorine and sulphur free *

Characteristic data
·  Appearance : amber liquid

 

Density at 20 °C	g/cm3	0.87 – 0.89	AA_003-9 acc. to DIN 51757
Kin. viscosity at 40 °C	mm2/s	2,700 – 3,300	AA_003-132 acc. to ASTM D 446
Kin. viscosity at 100 °C	mm2/s	237 – 281
Flash point	°C	≥ 170	AA_003-125 acc. to DIN EN ISO 2592

 

Instructions for use

·  Can be applied volume controlled in TOTAL LOSS ® procedure

·  Applied manually, or in recirculation lubrication when suitable pump systems can be used

·  Can easily cleaned with vapor degreasing or solvent washing methods.

·  Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C

* Chlorine and sulphur are not part of the product formulation